99% Extraction of MREO
Released
Released
Announcement PDF
ASXANNOUNCEMENT
ASX:BAK
31 August 2026
13–15 Rheola Street
West Perth WA 6005
+61 8 9386 0855
www.barklyrareearths.com
BARKLY ACHIEVES 99% MAGNET RARE EARTH OXIDE
EXTRACTION IN SIGHTER TEST
Barkly Rare Earths Limited (ASX:BAK) (‘Barkly’ or the ‘Company’) is pleased to announce that it
has achieved 99%magnet rareearth oxide (MREO)extraction to the acid leachsolution in a single
caustic conversion and hydrochloric acid (HCl) leach sighter test. The test was independently
completed by Nagrom on a composite sample from the Barkly Project, and the result represents
a substantial early technical improvement over previous leach testwork.
Highlights
• 99% combined MREO extraction to the acid leach solution
• 94% extraction of yttrium to the acid leach solution
• 92% of phosphorus reported to the caustic conversion solution with no
measurable rare earths reported
• Substantial improvement over previous leach testwork, which
extracted up to 74% of MREO1
• Ongoing work to confirm repeatability and optimise the caustic
conversion pathway while Barkly resource drilling continues
“This is an encouraging early metallurgical result for Barkly. Achieving 99%
combined MREO extraction to the acid leach solution indicates that caustic
conversion may unlock the rare earth minerals ahead of acid leaching while
transferring most of the phosphate to a separate conversion-stage solution.
While it is based on one small composite, the outcome gives the Company an
encouraging basis for further evaluation using larger-scale confirmatory testwork
on representative samples to assess the repeatability, optimisation and potential
flowsheet pathway for the Barkly Project.”
Craig Wright — Managing Director
1
Refer to Previous Disclosure Section
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 2
METALLURGICAL TESTWORK UPDATE
Caustic Conversion and Acid Leach Results
Nagrom reported a 99% magnet rare earth oxide (MREO) extraction rate from a composite
sample from the Barkly Project, delivering a strong early technical result for the Company. The
caustic conversion and acid leach sighter test resulted in 99% of MREO reporting to the
combined acid leach liquor and associated washes (together, the ‘acid leach solution’) on a
calculated-head, product-stream basis, and 94% of yttrium reporting to those streams. The acid
leach residue assayed just 18 ppm MREO, indicating that only a small proportion of the magnet
rare earths remained in the final residue. The result provides an encouraging indication that
caustic conversion may be an effective pathway to unlock the rare earth minerals at Barkly ahead
of acid leaching, subject to repeat and confirmatory testwork on representative samples.
Importantly, the test also demonstrated potentially favourable phosphorus deportment. In the
conversion stage, 92% of phosphorus reported to the caustic conversion liquor and associated
washes (together, the ‘caustic conversion solution’), while no measurable rare earths were
reported in those streams. This is a positive early processing indicator because phosphorus
separation is expected to be an important consideration in simplifying future purification and
flowsheet development.
The sighter test used a 75.45 g charge from composite sample 24C001. It comprised caustic
conversion at 150°C for two hours, separation and washing of the converted solids, and HCl
leaching at 50°C for two hours to a target pH of 1. For simplified reporting, ‘caustic conversion
solution’ and ‘acid leach solution’ include their respective primary filtrates and associated
washings.
Table 1: Calculated head grade for composite sample 24C001 and distribution of selected analytes.
Figures are rounded to whole numbers; solution totals include associated washings.
Analyte Calculated
head grade
Distribution to target stream
MREO 970 ppm 99% to acid leach solution
Y₂O₃ 39 ppm 94% to acid leach solution
P 0.28% 92% to caustic conversion solution
The 99% MREO extraction result compares with 74% reported from earlier testwork using NaOH
treatment followed by HCl leaching. Although the reagent sequence was similar, the operating
conditions differed, so the comparison should be treated as indicative only.
As expected for early-stage sighter testwork, further work is required before the Company can
define any processing flowsheet or assess technical and economic viability. The extraction
percentages were calculated from the assayed mass reporting to the product streams, rather
than by dividing recovered metal by the direct assay head. The calculated head grades were
approximately 970 ppm MREO and 39 ppm Y₂O₃, compared with direct assay head grades of
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 3
approximately 1,120 ppm MREO and 46 ppm Y₂O₃. This equates to head reconciliations of
approximately 87% for MREO and 84% for Y₂O₃ and is a limitation of this small-scale test.
The result is from a single sighter test using a non-representative composite with no duplicate
test of this route.The conditions havenotbeen optimised, and downstream purification,impurity
removal and rare earth product recovery have not yet been demonstrated. The primary acid leach
solution contained approximately 2.43 g/L aluminium and 2.03 g/L silicon. These impurities are
consistent with the gangue mineralogy and provide important information for future purification
and impurity-deportment testwork. The test is the most recent within a broader sighter
metallurgical testwork programme assessing a range of reagents and processing methods, with
results to inform future optimisation and flowsheet development.
Next Steps to Advance Flowsheet Evaluation
The next phase of this stream of metallurgical testwork will focus on confirming and optimising
the caustic conversion and acid leach pathway using larger, representative composites to:
• confirm repeatability and extraction performance at larger scale;
• optimise temperature, reagent dosage, residence time and solids washing;
• quantify reagent consumption, solution recycle and water requirements;
• evaluate impurity deportment, purification, reagent recycling, and rare earth product
recovery; and
• assess the technical and economic viability of any future processing flowsheet.
Appointment of Independent Metallurgical Consultant
The Company is also pleased to announce that it has appointed Lu Zhang of MinPro Consult Pty
Ltd as an independent metallurgical consultant to oversee the design, management and
reporting of metallurgical testwork for the Barkly Project. Ms Zhang will provide independent
technical review and oversight of the Company’s metallurgical testwork programme, including
coordination with specialist laboratories and review of metallurgical results before public
reporting. Her appointment strengthens the Company’s independent technical governance as
Barkly advances further optimisation, comparative leach testwork and flowsheet development
at the Barkly Project.
Ms Zhang was not involved in the design or management of the testwork that is the subject of this
report, but has reviewed and summarised the test results provided by Nagrom.
UPCOMING COMPANY WORK PROGRAMME
• Laboratory assay results from 10,000 m of drilling (to commence in the coming weeks
and progress throughout Q3 & Q4 CY2026)
• Rare earths concentration and extraction metallurgical testwork (ongoing)
• Mineral Resource update (Q4 CY2026, subject to drilling and laboratory assay progress)
• Geo-metallurgical testwork and modelling (Q3 & Q4 CY2026)
• Buntine exploration results (Q3 CY2026)
• Follow-up exploration at Buntine (Q4 CY2026)
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 4
Authorised by the Board of Barkly Rare Earths Limited.
Enquiries
Barkly Rare Earths Investor Relations
+61 8 9386 0855
ir@barklyrareearths.com
About Barkly Rare Earths Limited
Barkly Rare Earths Limited (ASX:BAK) is an Australian mineral exploration company focussed on the
discovery and development of economic mineral deposits, driven by technical expertise and disciplined
execution. Its strategy is to discover, delineate, and develop deposits capable of supporting long-term
production to meet growing global demand.
The Company’s flagship Barkly Project in Australia’s Northern Territory spans 5,030 km2
and is held 100%
by Barkly Rare Earths. It has an initial Inferred Mineral Resource of 40 Mt @ 710 ppm Magnet Rare Earth
Oxide (MREO), within 2,100 ppm Total Rare Earth Oxide (TREO) (reported above a 430 ppm NdPr cut-off
grade). The Mineral Resource includes a high terbium component, with low uranium and thorium. Initial
conventional leaching tests achieved 74% MREO extraction, with initial beneficiation testwork returning a
mineral concentrate of 29,000 ppm TREO. The consistently high magnet rare-earth grade and continuity of
mineralisation presents the potential to build a project of global significance.
At the Company’s Buntine Project in the Northern Territory, the Fraynes Formation is
chronostratigraphically equivalent to the Barney Creek Formation that hosts the McArthur River Pb-Zn
deposit, making the Fraynes Formation a target for greenfields base metal exploration. Polymetallic
mineralisation is exposed at the Buntine Project along a nine-kilometre (9 km) strike length of late-
Paleoproterozoic sedimentary rocks and overlying Cenozoic sediments, with three different anomalous
zones of Pb-Co, U-W-Pb-Ni, and Zn-Pb-Co-Cu along the mineralised corridor. Rock chip samples grade up
to 667 ppm Zn, 1% Pb, 1,760 ppm Co, 316 ppm Cu, 10% Mn, 7,100 ppm Ni, and 239 ppm Cr.
For more information, please visit: https://barklyrareearths.com/link/eo5n4P
COMPETENT PERSONS STATEMENT
The information in this announcement that relates to drillhole samples is based on information evaluated
by Richard Hall, who is a Fellow of the Australasian Institute of Mining and Metallurgy (FAusIMM), and a
Member of the Geological Society of Australia. He has sufficient experience relevant to the style of
mineralisation and type ofdeposit under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves’ (JORC Code, 2012). He consents to the
inclusion in this announcement of the matters based on his information in the form and context in which
it appears.
Mr Hall serves as General Manager—Exploration of Barkly Rare Earths Limited, in which he has a
shareholding. This association may give rise to a perceived conflict of interest in relation to his role as
Competent Person.
The information in this announcement that relates only to the reporting of metallurgical test results is
based on information evaluated by Lu Zhang, who is a Member of the Australasian Institute of Mining and
Metallurgy (MAusIMM). She has sufficient experience relevant to the style of mineralisation and type of
deposit under consideration and to the activity which she is undertaking to qualify as a Competent Person
as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves’ (JORC Code, 2012). She consents to the inclusion in this announcement of
the matters based on her information in the form and context in which it appears.
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 5
Forward Looking Statements
This announcement includes various ‘forward-looking statements’ with respect to, among other things,
goals, plans, and strategies. Such forward-looking statements are not guarantees of future performance
and involve known and unknown risks, uncertainties and other factors beyond the control of the Company
that may cause the actual results, performance and outcomes to be materially different from those
expressed or implied by such statements. Forward-looking statements are provided as a general guide
only and should not be relied on as an indication or guarantee of future performance. Given these
uncertainties, recipients are cautioned not to place undue reliance on any forward-looking statement.
Subject to any continuing obligations under applicable law, the Company disclaims any obligation or
undertaking to disseminate any updates or revisions to any forward-looking statements in this
announcement to reflect any change in expectations in relation to any forward-looking statements or any
change in events, conditions or circumstances on which any such statement is based.
Previous Disclosure
The information in this announcement that relates to Exploration Results and Mineral Resources is
extracted from the previous report titled Barkly and Buntine Projects, Northern Territory, Australia,
Independent Technical Report, included as Annexure A to the Company’s Prospectus dated 1 December
2025. The previous report was prepared in accordance with the 2012 Edition of the JORC Code, and it is
available to view on the Company’s website at www.barklyrareearths.com. The Company confirms that it
is not aware of any new information or data, as at the date of this announcement, that materially affects
the information included in the previous report and, in the case of estimates of Mineral Resources, that all
material assumptions and technical parameters underpinning the estimates in the previous report
continue to apply and have not materially changed. The Company confirms that the form and context in
which the Competent Person’s (Paul Teniere) findings are presented have not been materially modified
from the previous report.
Glossary
TREO (Total Rare Earth Oxide)
La2O3+CeO2+Pr6O11+Nd2O3+Sm2O3+Eu2O3+Gd2O3+Tb4O7+Dy2O3+Ho2O3+Er2O3+Tm2O3+Yb2O3+Lu2O3+Y2O3
NdPr (Neodymium-Praseodymium mixed oxide)
Nd2O3+Pr6O11
MREO (Magnet Rare Earth Oxide)
Nd2O3+Pr6O11+Tb4O7+Dy2O3
MREO Ratio (%)
MREO/TREO x 100
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 6
Table 2: Drillhole collar locations and intervals composited into sample 24C001
for metallurgical testwork. Coordinates are reported in GDA94 MGA Zone 53.
Hole ID From–To (m) Easting Northing RL (m) Date completed
VAC004 6.0–6.5
6.5–7.0
709485 8065402 268 22-Jul-22
VAC006 4–5 709419 8065200 266 23-Jul-22
VAC007 5–6 709544 8065087 268 23-Jul-22
VAC010 5–6 709270 8065106 267 23-Jul-22
VAC011 4–5 709170 8065102 268 24-Jul-22
VAC024 11–12 709800 8065397 270 25-Jul-22
VAC025 14–15 710088 8065402 277 25-Jul-22
VAC027 22–23 710636 8065399 285 25-Jul-22
VAC033 12–13 710302 8065100 276 26-Jul-22
VAC034 8–9 710000 8065105 270 26-Jul-22
VAC036 13–14 709900 8065700 274 5-Aug-22
VAC037 11–12 709600 8065700 271 5-Aug-22
VAC038 10–11 709750 8066000 272 5-Aug-22
VAC039 16–17 710050 8066000 280 5-Aug-22
JORC Code, 2012 Edition — Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling
(e.g. cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals under
investigation, such as down hole
gamma sondes, or handheld XRF
instruments, etc). These
examples should not be taken as
limiting the broad meaning of
sampling.
• Include reference to measures
taken to ensure sample
representivity and the appropriate
calibration of any measurement
tools or systems used.
• Aspects of the determination of
mineralisation that are Material to
the Public Report.
• In cases where ‘industry
standard’ work has been done
this would be relatively simple (eg
‘reverse circulation drilling was
used to obtain 1 m samples from
which 3 kg was pulverised to
produce a 30 g charge for fire
• All drill samples were collected through a cyclone into
plastic bags at 0.5-m intervals (holes VAC004) or 1-m
intervals (VAC006 – VAC039). All samples were
weighed before being individually passed through a
50:50 riffle splitter for homogenisation, then
subsampled into ~2-kg samples in numbered calico
bags.
• Sample representativity was assured through the
application of SOPs that specified processes to
optimise recovery and prevent contamination and
sampling errors.
• These samples were disclosed in full in the previous
report titled Barkly and Buntine Projects, Northern
Territory, Australia, Independent Technical Report,
included as Annexure A to the Company’s Prospectus
dated 1 December 2025. The previous report was
prepared in accordance with the 2012 Edition of the
JORC Code, and it is available to view at the
Company’s website www.barklyrareearths.com.
• Nagrom was supplied with a 0.7kg split from a
composite sample comprised of fifteen dry master
pulp samples listed in Table 2Error! Reference source
not found. of this announcement, that were previously
prepared by ALS (pulverised to 85% passing 75 µm),
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 7
Criteria JORC Code explanation Commentary
assay’). In other cases more
explanation may be required,
such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities
or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed
information.
representing 14 m of drilling from fourteen drillholes at
the Barkly Project.
• A single 75.45 g test charge was subjected to caustic
conversion at 150°C for 120 minutes using sodium
hydroxide. The caustic conversion solution was
separated, and the converted solids were washed to
remove residual caustic and soluble phosphate. The
washed converted solids were then leached in HCl at
50°C for 120 minutes to a target pH of 1. The caustic
conversion solution, acid leach solution, associated
washes and acid leach residue were assayed. Exact
caustic concentration and dosage are not disclosed in
this announcement for commercial-sensitivity
reasons.
Drilling
techniques
• Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit or other type,
whether core is oriented and if so,
by what method, etc).
• The contractor, McLeod Drilling, used a reverse
circulation aircore drill rig mounted on a six-wheel
drive Toyota Landcruiser with a 250 psi ELGI
compressor that has 650 cfm capacity.
• Aircore drilling used a 76-mm, mini, face-sampling, RC
hammer bit where the sample is collected at the face
and returned via the inner tube. The drill cuttings were
removed by injecting compressed air into the hole via
the annular area between the inner tube and the drill
rod.
• Drill rods are 3-m NQ rods.
• All drillholes were between 9 m and 23 m in length and
drilled vertically.
Drill sample
recovery
• Method of recording and
assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
• Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
• Assessment of recovery was undertaken by weighing
each sample and monitoring against theoretical
maximum values.
• McLeod Drilling actively worked to optimise sample
recovery and quality. Drilling was slowed in tough
ground and holes redrilled if recovery was poor. SOPs
were in place to ensure consistency.
• No relationship exists between sample recovery and
grade, and it is considered unlikely that grades are
either upgraded or downgraded due to recovery issues.
Logging • Whether core and chip samples
have been geologically and
geotechnically logged to a level of
detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
• Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
• The total length and percentage of
the relevant intersections logged.
• All samples were geologically logged to include details
such as colour, grain size, indicative moisture content,
and lithology. Relogging was completed in August 2023
on available stored chips to review grain size variations
and determine any stratigraphic relationships in
relation to grade in further detail. The Competent
Person considers the logging procedures to have been
carried out to an appropriate level of detail to support
metallurgical studies.
• The holes were logged both qualitatively and
quantitatively (pXRF), and chip trays were
photographed.
• All intervals were logged.
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 8
Criteria JORC Code explanation Commentary
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and
whether quarter, half or all core
taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
• For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
• Quality control procedures
adopted for all sub-sampling
stages to maximise representivity
of samples.
• Measures taken to ensure that the
sampling is representative of the
in situ material collected,
including for instance results for
field duplicate/second-half
sampling.
• Whether sample sizes are
appropriate to the grain size of the
material being sampled.
• All drill samples were collected through a cyclone into
plastic bags at 0.5-m intervals (holes VAC004) or 1-m
intervals (VAC006 – VAC039). All samples were
weighed before being individually passed through a
50:50 riffle splitter for homogenisation, then
subsampled into ~2-kg samples in numbered calico
bags.
• Duplicates were collected from the cyclone (first-split
duplicates) and at the laboratory when splitting after
pulverising. Analysis of the first-split duplicates
indicates that the splitting process was typically
consistent.
• The Competent Person considers the sample sizes
appropriate for the grain size of the material sampled.
• Selected samples were subsequently sent to ALS
Townsville for further preparation, including an
industry-standard approach of drying and
pulverising/splitting (pulverising to 85% passing 75
µm).
• Fifteen dry master pulp samples were sent to
Specialised Metallurgical Services Pty Ltd (SMS) where
they were composited under laboratory supervision
into a single test sample of 9.22 kg under Sample ID
24C001, and rotary split, weighed, and bagged. A 0.7 kg
split was dispatched to Nagrom, per sample
submission protocol.
• All techniques were standard and are considered
appropriate by the Competent Person.
Quality of assay
data and
laboratory tests
• The nature, quality and
appropriateness of the assaying
and laboratory procedures used
and whether the technique is
considered partial or total.
• For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times, calibrations
factors applied and their
derivation, etc.
• Nature of quality control
procedures adopted (eg
standards, blanks, duplicates,
external laboratory checks) and
whether acceptable levels of
accuracy (ie lack of bias) and
precision have been established.
• A selection of 2-kg split sample intervals was selected
using pXRF pre-screening of intervals assessed as
potentially mineralised for submission to ALS for
geochemical analysis.
• Samples were originally analysed at ALS Townsville for
multi-element analysis via four-acid digest (laboratory
code ME-MS61r).
• Samples were then analysed via Li-borate fusion
followed by acid digest and analysed by ICP-MS
(laboratory code ME-MS81), which is a complete
digestion.
• Laboratory blank results confirmed there was no
contamination during analyses.
• Insufficient CRM data were available to statistically
assess the quality of the flux-fusion data.
• Sighter metallurgical testwork, including assaying of
the metallurgical composite and testwork products,
was conducted by Nagrom, 49 Owen Road, Kelmscott
WA 6111. Nagrom is an established independent and
ISO9001 certified metallurgical laboratory providing
metallurgical testwork and analytical services to the
mining industry in Australia and internationally. Solid
samples were analysed by XRF and ICP, and solution
samples were analysed by ICP. Nagrom’s standard
laboratory QA/QC procedures were applied.
Verification of
sampling and
assaying
• The verification of significant
intersections by either
• No significant intersections are reported here.
• The use of twinned holes is not applicable at this stage.
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 9
Criteria JORC Code explanation Commentary
independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data,
data entry procedures, data
verification, data storage
(physical and electronic)
protocols.
• Discuss any adjustment to assay
data.
• Apart from the routine QA/QC procedures of the
Company and the laboratory, there was no other
independent or alternative verification of sampling and
assaying procedures.
• Primary data are stored in their source electronic
forms. Analytical results were reviewed by the
Company’s consultant metallurgist, and specialists at
Nagrom.
• No adjustment was made to the assay data. REE
analyses were originally reported in elemental form
and were subsequently converted to relevant oxide
concentrations, as per industry standard conversions:
• La:1.1728, Ce:1.2284, Pr:1.2082, Nd:1.1664,
Sm:1.1596, Eu:1.1579, Gd:1.1526, Tb:1.1762,
Dy:1.1477, Ho:1.1455, Er:1.1435, Tm:1.1421,
Yb:1.1387, Lu:1.1371, and Y:1.2699.
• Abbreviations used throughout this document in
accordance with IUPAC guidelines or common industry
usage are as follows.
TREO (Total Rare Earth Oxide)
La2O3+CeO2+Pr6O11+Nd2O3+Sm2O3+Eu2O3+Gd2O3+Tb4O7
+Dy2O3+Ho2O3+Er2O3+Tm2O3+Yb2O3+Lu2O3+Y2O3
NdPr (Neodymium-Praseodymium mixed oxide)
Nd2O3+Pr6O11
MREO (Magnet Rare Earth Oxide)
Nd2O3+Pr6O11+Tb4O7+Dy2O3
MREO Ratio (%)
MREO/TREO x 100
• Element distributions were calculated on a product-
stream mass basis using measured solution
concentrations and recovered volumes, adjusted for
solution density where applicable, together with dry
residue mass and residue assay. For simplified
reporting, the caustic conversion solution includes the
primary conversion filtrate and its associated washes;
the acid leach solution includes the primary acid
filtrate and its associated washes. MREO extraction to
the acid leach solution was calculated as MREO mass
in that solution divided by MREO mass in the acid leach
solution plus acid leach residue. The corresponding
calculated-head grades reconciled to approximately
87% of the direct assay head for MREO and 84% for
Y₂O₃.
Location of data
points
• Accuracy and quality of surveys
used to locate drillholes (collar
and down-hole surveys),
trenches, mine workings and
other locations used in Mineral
Resource estimation.
• Specification of the grid system
used.
• Quality and adequacy of
topographic control.
• The locations of drillhole collars were determined by
RSC staff using a hand-held GPS with an accuracy of
±5 m during the drilling programme. All holes were
drilled vertically and were not downhole surveyed due
to their short nature.
• Coordinates are reported in GDA94 MGA Zone 53.
• A digital terrain model (DTM) was generated using 2-m
contours from the 30-m resolution Shuttle Radar
Topography Mission (SRTM) digital elevation model
(DEM) (http://www.jpl.nasa.gov/srtm/).
• Drillhole collar elevations were draped onto the DTM in
the block model.
ASX ANNOUNCEMENT
BARKLYACHIEVES99%MREOEXTRACTION
www.barklyrareearths.com 10
Criteria JORC Code explanation Commentary
Data spacing
and distribution
• Data spacing for reporting of
Exploration Results.
• Whether the data spacing and
distribution is sufficient to
establish the degree of geological
and grade continuity appropriate
for the Mineral Resource and Ore
Reserve estimation procedure(s)
and classifications applied.
• Whether sample compositing has
been applied.
• Drill lines were spaced between 150 m and 300 m
apart. Drillholes were spaced between 150 m and 300
m.
• No new Mineral Resources or Ore Reserves are
reported in this document.
• Fifteen master pulp samples were composited into a
single test sample for metallurgical analyses.
Orientation of
data in relation
to geological
structure
• Whether the orientation of
sampling achieves unbiased
sampling of possible structures
and the extent to which this is
known, considering the deposit
type.
• If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported
if material.
• All holes were drilled vertically, which is approximately
perpendicular to the sub-horizontal mineralised strata;
therefore, sampling is considered unbiased with
respect to the sampling orientation.
Sample security • The measures taken to ensure
sample security.
• All samples have been in the custody of Barkly Rare
Earths or its consultants at all times, and hand-over
procedures were in place for shipment to the
laboratory.
Audits or
reviews
• The results of any audits or
reviews of sampling techniques
and data.
• No formal audits or reviews of the original sampling
techniques and data have been undertaken at this
stage.
Section 2 Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference
name/number, location and
ownership including
agreements or material issues
with third parties such as joint
ventures, partnerships,
overriding royalties, native title
interests, historical sites,
wilderness or national park
and environmental settings.
• The security of the tenure held
at the time of reporting along
with any known impediments
to obtaining a licence to
operate in the area.
• The Barkly Project licences are
Share your feedback
Discover