97 - 98% MREO Extraction from Dry Calcination Tests
Released
Released
Announcement PDF
ASXANNOUNCEMENT
ASX:BAK
20 November 2026
13–15 Rheola Street
West Perth WA 6005
+61 8 9386 0855
www.barklyrareearths.com
DRY CALCINATION FOLLOWED BY ACID LEACHING ACHIEVES
97–98% MAGNET RARE EARTH OXIDE EXTRACTION
Barkly Rare Earths Limited (ASX:BAK) (‘Barkly’ or the ‘Company’) is pleased to announce it has
achieved 97–98% magnet rare earth oxide (MREO) extraction in three sighter tests, each
combining dry calcination (using no acid or other reagents) with a subsequent acid leach. The
tests were completed independently by Nagrom on a composite sample from the Barkly Project.
The results support further evaluation of an alternative high-extraction route that may be simpler
and lower cost than caustic conversion, subject to comparative assessment of capital, reagent
and energy requirements. The caustic conversion and calcination routes have each now
extracted at least 97% of the MREO to the acid leach solution in sighter tests1
.
Highlights
97–98% of MREO extracted to the acid leach solution in all three sighter tests,
leaving minimal MREO in the leach residues
90% of yttrium extracted in all three tests
97–99% of phosphorus extracted to the acid leach solution
Only 8–10% of the calcined sample mass dissolved, indicating selective
dissolution of the rare earth-bearing minerals
Dry calcination uses no acid or other reagents during thermal treatment,
potentially offering a simpler, safer and cheaper processing flowsheet1
Work to confirm and optimise the calcination pathway, together with physical
beneficiation for rare earth upgrade and gangue mineral rejection, is underway
“These tests were undertaken based on our detailed understanding of the
mineralogy and they support our working hypothesis that calcination may offer an
effective, simpler and lower-cost processing route than a traditional caustic
conversion flowsheet. No acid or other reagents were added in the calcination step.
Avoiding acid handling and off-gas scrubbing around the thermal unit could
potentially simplify plant design and operation, and offer safety and cost benefits.
The tests also dissolved almost all of the phosphorus, which will be investigated for
potential by-product opportunities to offset processing costs. Having two high-
extraction routes now lets us optimise and compare them side by side as we work
towards flowsheet finalisation.”
Craig Wright — Managing Director
1
See Previous Disclosure section
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 2
METALLURGICAL TESTWORK UPDATE
Calcination and Acid Leach Results
Nagrom’s results demonstrate MREO extraction of 97–98% in all three sighter tests, in which the
composite sample, 24C001, from the Barkly Project underwent dry calcination without added
acid or other reagents, then acid leaching. MREO is defined as the combined oxides of four rare
earths: praseodymium, neodymium, terbium and dysprosium (Nd2O3+Pr6O11+Tb4O7+Dy2O3).
The extraction figures are the share of MREO that reported to the primary filtrate and its two
washes (together, the ‘acid leach solution’), on a calculated-head, product-stream basis.
Two composite charges of about 150 g were calcined for two hours, one at 600 °C and one at
700 °C. A 50 g sub-sample of each calcine was leached using sulphuric acid (H2SO4) at 90 °C for
six hours. A second 50 g sub-sample of the 700 °C calcine was leached using hydrochloric acid
(HCl) at 75 °C for two hours. Each leach was undertaken at 10 wt% pulp density; the slurry was
filtered and the residue was washed twice with deionised water. Figure 1 illustrates the test
sequence, and Table 1 presents the conditions and results.
Figure 1: Sequence of the calcination and acid leach sighter tests on composite sample 24C001, with
MREO extraction to the acid leach solution.
Sulphuric acid leach extracted 97% of MREO from both the 600 °C and 700 °C calcined samples,
so the lower calcination temperature gave the same MREO extraction. Hydrochloric acid leach
extracted 98% of MREO and 98% of total rare earth oxides (TREO) from the 700 °C calcined
sample. TREOextractions were lower in both sulphuric acid leach tests, at 92–93%, because less
lanthanum (76–79%) and cerium (90–91%) reported to the solution. The two acids were tested at
different acid strengths, temperatures and leach times, so attribution of the difference between
them cannot be limited to the acid alone. Yttrium extraction was 90% in all three tests. The leach
residues assayed just 19–39 ppm MREO, compared with calculated leach head grades of 1,110–
1,120 ppm.
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 3
Only 8–10% of the calcined sample mass dissolved in the leach, while 97–98% of the MREO
reported to the acid leach solution. This indicates selective dissolution of the rare earth-bearing
minerals.
Table 1: Test conditions and extraction to the acid leach solution. Extraction percentages are rounded to
whole numbers and head grades to the nearest 10 ppm. The acid leach solution includes the primary
filtrate and both washes.
600 °C calcine
H2SO4 leach
700 °C calcine
H2SO4 leach
700 °C calcine
HCl leach
Calcination 600 °C
2 hours
700 °C
2 hours
700 °C
2 hours
Acid leach H2SO4, 90 °C
6 hours
H2SO4, 90 °C
6 hours
HCl, 75 °C
2 hours
Leach charge 50 g 50 g 50 g
MREO extraction
Nd2O3 extraction
Pr6O11 extraction
Tb4O7 extraction
Dy2O3 extraction
97%
97%
95%
99%
98%
97%
97%
94%
97%
96%
98%
99%
98%
99%
96%
Y2O3 extraction 90% 90% 90%
TREO extraction 93% 92% 98%
MREO assayed calcine grade
MREO calculated leach head grade
1,160 ppm
1,110 ppm
1,140 ppm
1,110 ppm
1,140 ppm
1,120 ppm
MREO leach residue grade 37 ppm 39 ppm 19 ppm
Comparison with the Caustic Conversion Test
Table 2 compares the tests reported here alongside the caustic conversion and HCl leach test
reported on 31 August 2026, which extracted 99% of MREO (see Previous Disclosure section).
The calcination and acid leach tests extracted 97–98% without a caustic conversion step, so
both routes have now extracted at least 97% of MREO to the acid leach solution. Both routes
delivered better MREO extractions when compared with the earlier leach testwork that extracted
up to 74% of MREO. It should be noted that the flowsheet and conditions differed between tests,
so the comparison is indicative only (see Previous Disclosure section). The tests are part of a
broader sighter metallurgical testwork programme assessing a range of reagents and processing
methods.
Table 2: The calcination and acid leach tests and the caustic conversion test, all run by Nagrom on
composite sample 24C001. MREO extraction is to the acid leach solution on a calculated-head, product-
stream basis.
Pre-treatment Leach MREO extraction (%) Reported
Caustic conversion at 150 °C for 2
hours, then separation and washing
HCl, 50 °C, 2 hours 99 31 August 2026
Calcination at 600 °C for 2 hours H2SO4, 90 °C, 6 hours 97 This announcement
Calcination at 700 °C for 2 hours H2SO4, 90 °C, 6 hours 97 This announcement
Calcination at 700 °C for 2 hours HCl, 75 °C, 2 hours 98 This announcement
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 4
All four tests used the same 0.7 kg split of the 24C001 composite sample. The three sighter tests
in this announcement also had better assay reconciliations for MREO, with only 2–4% deviations
between calculated head and assayed head, compared with 13% in the caustic conversion test.
The closer reconciliation provides strong confidence in the extraction figures reported here.
Potential Phosphorus By-Product in the Leach Solution
The rare earths at Barkly are hosted in aluminium-phosphate-sulphate (APS) minerals, and
almost all of the phosphorus dissolved with the rare earths; this co-dissolution is consistent with
dissolution of phosphate-bearing REE minerals. In the three tests, 97–99% of the phosphorus
reported to the acid leach solution. In the caustic conversion test, 92% of the phosphorus
reported to a separate caustic conversion solution ahead of the acid leach. Separating the
phosphorus from the leach solution into a potential by-product stream may be an important part
of any flowsheet. It has not yet been tested and is part of the next phase of testwork.
Next Steps to Advance Flowsheet Evaluation
Planning for the next phase of work is underway and will use larger, representative composites
from the Phase 1 drilling to:
Repeat the calcination and acid leach tests and confirm extraction at larger scale;
Optimise calcination grind size, lower calcination temperatures and shorter times,
and optimise acid strength, leach temperature, residence time and leach pulp
density, aiming to further improve leach selectivity;
Assess impurity removal from the leach solution, and recovery of a rare earth product;
Investigate the separation of phosphorus from the purified leach solution and assess
the potential for by-product generation;
Compare the calcination and caustic conversion routes for reagent and energy use,
impurity deportment and product recovery; and
Assess the technical and economic viability of any future processing flowsheet.
Additionally, the Company will assess the potential for rare earth upgrade and gangue material
rejection using physical beneficiation methods such as flotation.
UPCOMING COMPANY WORK PROGRAMME
Assay results from the Phase 1 drilling programme (ongoing)
Rare earths concentration and extraction testwork (ongoing)
Mineral Resource update (Q4 CY2026)
Exploration Target update (Q4 CY2026)
Subsequent Mineral Resource update (Q1 CY2027)
Subsequent Exploration Target update (Q1 CY2027)
This announcement has been authorised for release by the Board of Barkly Rare Earths Limited.
ENDS
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 5
Enquiries
Barkly Rare Earths Investor Relations
+61 8 9386 0855
ir@barklyrareearths.com
About Barkly Rare Earths Limited
Barkly Rare Earths Limited (ASX:BAK) is an Australian mineral exploration company focussed on the
discovery and development of economic mineral deposits, driven by technical expertise and disciplined
execution. Its strategy is to discover, delineate, and develop deposits capable of supporting long-term
production to meet growing global demand.
The Company’s flagship Barkly Project in Australia’s Northern Territory spans 5,030 km2
and is held 100%
by Barkly Rare Earths. It has an initial Inferred Mineral Resource of 40 Mt @ 710 ppm Magnet Rare Earth
Oxide (MREO), within 2,100 ppm Total Rare Earth Oxide (TREO) (reported above a 430 ppm NdPr cut-off
grade). The Mineral Resource includes a high terbium component, with low uranium and thorium (7 ppm
Tb4O7, 3 ppm U, 7 ppm Th; see Previous Disclosure section). Sighter tests on a small composite sample
have extracted 97–99% of MREO to acid leach solution by two of the routes tested, caustic conversion
followed by acid leaching and calcination followed by acid leaching, on a calculated-head, product-
stream basis. Downstream recovery has not yet been demonstrated and is a focus of future testwork.
Shallow, flat-lying mineralisation, a consistently high magnet rare earth ratio, low uranium and thorium,
and now two high-extraction routes in sighter tests together provide the basis on which the Company is
testing whether the Barkly Project can support long-term production at scale.
At the Company’s Buntine Project in the Northern Territory, the Fraynes Formation is
chronostratigraphically equivalent to the Barney Creek Formation that hosts the McArthur River Pb-Zn
deposit. The two formations are likely linked in the subsurface, making the Fraynes Formation a target for
greenfields base metal exploration. Polymetallic mineralisation is exposed at the Buntine Project along a
9 km strike length of late-Paleoproterozoic sedimentary rocks and overlying Cenozoic sediments, with
three different anomalous zones of Pb-Co, U-W-Pb-Ni, and Zn-Pb-Co-Cu along the mineralised corridor.
Rock chip samples grade up to 667 ppm Zn, 1% Pb, 1,760 ppm Co, 316 ppm Cu, 10% Mn, 7,100 ppm Ni,
and 239 ppm Cr (see Previous Disclosure section).
For more information, please visit https://barklyrareearths.com/link/yVz05y
Competent Persons’ Statements
The information in this announcement that relates to drillhole samples is based on information evaluated
by Richard Hall, who is a Fellow of the Australasian Institute of Mining and Metallurgy (FAusIMM), and a
Member of the Geological Society of Australia. He has sufficient experience relevant to the style of
mineralisation and type ofdeposit under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves’ (JORC Code, 2012). He consents to the
inclusion in this announcement of the matters based on his information in the form and context in which
it appears.
Mr Hall serves as General Manager—Exploration of Barkly Rare Earths Limited, in which he has a
shareholding. This association may give rise to a perceived conflict of interest in relation to his role as
Competent Person.
The information in this announcement that relates to the reporting of metallurgical test results is based
on, and fairly represents, information and supporting documentation reviewed by Lu Zhang, who is a
Member of the Australasian Institute of Mining and Metallurgy (MAusIMM). She has sufficient experience
relevant to the style of mineralisation and type of deposit under consideration and to the activity which she
is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code
for Reporting of Exploration Results, Mineral Resources and Ore Reserves’ (JORC Code, 2012). She
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 6
consents to the inclusion in this announcement of the matters based on her information in the form and
context in which it appears.
Ms Zhang is an independent metallurgical consultant to the Company and is employed by MinPro Consult
Pty Ltd. She liaised with Nagrom on the set-up and execution of the testwork reported in this
announcement.
Forward-Looking Statements
This announcement includes various ‘forward-looking statements’ with respect to, among other things,
goals, plans, and strategies. Such forward-looking statements are not guarantees of future performance
and involve known and unknown risks, uncertainties and other factors beyond the control of the Company
that may cause the actual results, performance and outcomes to be materially different from those
expressed or implied by such statements. Forward-looking statements are provided as a general guide
only and should not be relied on as an indication or guarantee of future performance. Given these
uncertainties, recipients are cautioned not to place undue reliance on any forward-looking statement.
Subject to any continuing obligations under applicable law, the Company disclaims any obligation or
undertaking to disseminate any updates or revisions to any forward-looking statements in this
announcement to reflect any change in expectations in relation to any forward-looking statements or any
change in events, conditions or circumstances on which any such statement is based.
Previous Disclosure
The information in this announcement that relates to previous Exploration Targets, Exploration Results,
and Mineral Resources is extracted from the reports listed below, each prepared in accordance with the
2012 Edition of the JORC Code and available to view on the Company’s website at
www.barklyrareearths.com. The Company confirms that it is not aware of any new information or data as
at the date of this announcement that materially affects the information included in those reports, and, in
the case of estimates of Mineral Resources, that all material assumptions and technical parameters
underpinning the estimates continue to apply and have not materially changed. The Company confirms
that the form and context in which the Competent Persons’ findings are presented have not been
materially modified from those reports.
1. Barkly and Buntine Projects, Northern Territory, Australia, Independent Technical Report,
included as Annexure A to the Company’s Prospectus dated 1 December 2025. Competent
Person: Paul Teniere.
2. ASX announcement dated 31 August 2026 titled ‘Barkly Achieves 99% Magnet Rare Earth Oxide
Extraction in Sighter Test’. Competent Persons: Richard Hall and Lu Zhang.
3. ASX announcement dated 19 October 2026 titled ‘Rare Earth Mineralisation Continues in a Further
16 Holes’. Competent Person: Richard Hall.
Glossary
TREO (Total Rare Earth Oxide)
La2O3+CeO2+Pr6O11+Nd2O3+Sm2O3+Eu2O3+Gd2O3+Tb4O7+Dy2O3+Ho2O3+Er2O3+Tm2O3+Yb2O3+Lu2O3+Y2O3
NdPr (Neodymium-Praseodymium mixed oxide)
Nd2O3+Pr6O11
MREO (Magnet Rare Earth Oxide)
Nd2O3+Pr6O11+Tb4O7+Dy2O3
MREO Ratio (%)
MREO/TREO × 100
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 7
Appendix 1: JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry
standard measurement tools
appropriate to the minerals under
investigation, such as down hole
gamma sondes, or handheld XRF
instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
Include reference to measures
taken to ensure sample
representivity and the appropriate
calibration of any measurement
tools or systems used.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
In cases where ‘industry standard’
work has been done this would be
relatively simple (eg ‘reverse
circulation drilling was used to
obtain 1 m samples from which 3 kg
was pulverised to produce a 30 g
charge for fire assay’). In other cases
more explanation may be required,
such as where there is coarse gold
that has inherent sampling
problems. Unusual commodities or
mineralisation types (eg submarine
nodules) may warrant disclosure of
detailed information.
All drill samples were collected through a cyclone into plastic bags at
0.5-m intervals (hole VAC004) or 1-m intervals (VAC006 – VAC039). All
samples were weighed before being individually passed through a
50:50 riffle splitter for homogenisation, then subsampled into ~2-kg
samples in numbered calico bags.
Drill sample representativity was assured through the application of
SOPs that specified processes to optimise recovery and prevent
contamination and sampling errors.
These samples from the 2022 drilling campaign were disclosed in full
in the previous report titled Barkly and Buntine Projects, Northern
Territory, Australia, Independent Technical Report, included as
Annexure A to the Company’s Prospectus dated 1 December 2025.
The previous report was prepared in accordance with the 2012 Edition
of the JORC Code, and it is available to view at the Company’s website
www.barklyrareearths.com.
Nagrom was supplied with a 0.7 kg split from a composite sample
comprised of fifteen dry master pulp samples listed in Table 2 of the
Company’s ASX announcement of 31 August 2026 titled ‘Barkly
Achieves 99% Magnet Rare Earth Oxide Extraction in Sighter Test’, that
were previously prepared by ALS (pulverised to 85% passing 75 µm),
representing 14 m of drilling from fourteen drillholes at the Barkly
Project. The same split was used for the caustic conversion test
reported on 31 August 2026.
Two charges of the composite (151.51 g and 146.79 g) were calcined in
a furnace with no reagents added. Each charge was heated to
temperature over 30 minutes and held for 120 minutes, one at 600 °C
and one at 700 °C, with mass losses of 3.6% and 3.4%, respectively.
The calcined samples were assayed.
A 50.16 g sub-sample of the 600 °C calcine and a 50.05 g sub-sample
of the 700 °C calcine were each leached using H2SO4 solution at 10
wt% pulp density and at 90 °C for 6 hours. A 50.00 g sub-sample of the
700 °C calcine was leached using HCl solution at 10 wt% pulp density
and at 75 °C for 2 hours. Exact acid concentration and dosage are not
disclosed in this announcement for commercial-sensitivity reasons.
Each slurry was vacuum filtered through a Buchner funnel and the
residue was displacement-washed twice with deionised water
(approximately 100 g per wash). The primary filtrate, the two washes
and the dried residue from each test were assayed.
Drilling
techniques
Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit or other type, whether
core is oriented and if so, by what
method, etc).
The contractor, McLeod Drilling, used a reverse circulation aircore drill
rig mounted on a six-wheel drive Toyota Landcruiser with a 200 psi
ELGI compressor that has 400 cfm capacity.
Aircore drilling used a 76-mm (3 inch), mini, face-sampling, RC
crossover hammer bit where the sample is collected at the face and
returned via the inner tube. The drill cuttings were removed by
injecting compressed air into the hole via the annular area between
the inner tube and the drill rod.
Drill rods are 60 mm wide 3-m rods.
All drillholes were between 9 m and 23 m in length and drilled
vertically.
Drill sample
recovery
Method of recording and assessing
core and chip sample recoveries
and results assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Assessment of recovery was undertaken by weighing each sample and
monitoring against theoretical maximum values.
McLeod Drilling actively worked to optimise sample recovery and
quality. Drilling was slowed in tough ground and holes redrilled if
recovery was poor. SOPs were in place to ensure consistency.
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 8
Criteria JORC Code explanation Commentary
Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
occurred due to preferential
loss/gain of fine/coarse material.
No relationship exists between sample recovery and grade, and it is
considered unlikely that grades are either upgraded or downgraded
due to recovery issues.
Logging Whether core and chip samples
have been geologically and
geotechnically logged to a level of
detail to support appropriate Mineral
Resource estimation, mining studies
and metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of
the relevant intersections logged.
All samples were geologically logged to include details such as colour,
grain size, indicative moisture content, and lithology. Relogging was
completed in August 2023 on available stored chips to review grain
size variations and determine any stratigraphic relationships in
relation to grade in further detail. The Competent Person considers the
logging procedures to have been carried out to an appropriate level of
detail to support metallurgical studies.
The holes were logged both qualitatively and quantitatively (pXRF), and
chip trays were photographed.
All intervals were logged.
Sub-
sampling
techniques
and sample
preparation
If core, whether cut or sawn and
whether quarter, half or all core
taken.
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted
for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the
sampling is representative of the in
situ material collected, including for
instance results for field
duplicate/second-half sampling.
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
No core was drilled.
All drill samples were collected through a cyclone into plastic bags at
0.5-m intervals (hole VAC004) or 1-m intervals (VAC006 – VAC039). All
samples were weighed before being individually passed through a
50:50 riffle splitter for homogenisation, then subsampled into ~2-kg
samples in numbered calico bags.
Duplicates were collected from the cyclone (first-split duplicates) and
at the laboratory when splitting after pulverising. Analysis of the first-
split duplicates indicates that the splitting process was typically
consistent. The Competent Person considers the sample sizes
appropriate for the grain size of the material sampled.
Selected samples were subsequently sent to ALS Townsville for
further preparation, including an industry-standard approach of drying
and pulverising/splitting (pulverising to 85% passing 75 µm).
Fifteen dry master pulp samples were sent to Specialised
Metallurgical Services Pty Ltd (SMS) where they were composited
under laboratory supervision into a single test sample of 9.22 kg under
Sample ID 24C001, and rotary split, weighed, and bagged. A 0.7 kg
split was dispatched to Nagrom, per sample submission protocol.
All techniques were standard and are considered appropriate by the
Competent Person.
The Competent Person considers the sample sizes appropriate for the
material sampled.
Quality of
assay data
and
laboratory
tests
The nature, quality and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times, calibrations
factors applied and their derivation,
etc.
Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory
checks) and whether acceptable
levels of accuracy (ie lack of bias)
and precision have been
established.
A selection of 2-kg split sample intervals was selected using pXRF pre-
screening of intervals assessed as potentially mineralised for
submission to ALS for geochemical analysis.
Samples were originally analysed at ALS Townsville for multi-element
analysis via four-acid digest (laboratory code ME-MS61r).
Samples were then analysed via Li-borate fusion followed by acid
digest and analysed by ICP-MS (laboratory code ME-MS81), which is a
complete digestion.
Laboratory blank results confirmed there was no contamination during
analyses.
Insufficient CRM data were available to statistically assess the quality
of the flux-fusion data.
Sighter metallurgical testwork, including assaying of the metallurgical
composite and testwork products, was conducted by Nagrom, at 49
Owen Road, Kelmscott WA 6111. Nagrom is an established
independent and ISO 9001 certified metallurgical laboratory providing
metallurgical testwork and analytical services to the mining industry in
Australia and internationally. Solid samples were analysed by XRF and
ICP, and solution samples were analysed by ICP. Nagrom’s standard
laboratory QC procedures were applied.
Assays below the laboratory detection limit were treated as zero in the
mass balances. Several terbium and dysprosium assays in the wash
solutions and leach residues were at or close to detection limits (0.1
ASX ANNOUNCEMENT
DryCalcinationandAcidLeachingAchieve97–98%Extraction
www.barklyrareearths.com 9
Criteria JORC Code explanation Commentary
mg/L Tb and 0.5 mg/L Dy in solution; 0.1 ppm Tb and 0.5 ppm Dy in
residue), so the extraction figures for those two elements are less
precise than those for neodymium and praseodymium.
Verification
of sampling
and
assaying
The verification of significant
intersections by either independent
or alternative company personnel.
The use of twinned holes.
Documentation of primary data,
data entry procedures, data
verification, data storage (physical
and electronic) protocols.
Discuss any adjustment to assay
data.
No significant intersections are reported here.
The use of twinned holes is not applicable at this stage.
Apart from the routine QA/QC procedures of the Company and the
laboratory, there was no other independent or alternative verification
of sampling and assaying procedures.
Primary data are stored in their source electronic forms. Analytical
results were reviewed by the Company’s consultant metallurgist, and
specialists at Nagrom.
No adjustment was made to the assay data. REE analyses were
originally reported in elemental form and were subsequently
converted to relevant oxide concentrations, as per industry standard
conversions: La:1.1728, Ce:1.2284, Pr:1.2082, Nd:1.1664, Sm:1.1596,
Eu:1.1579, Gd:1.1526, Tb:1.1762, Dy:1.1477, Ho:1.1455, Er:1.1435,
Tm:1.1421, Yb:1.1387, Lu:1.1371, and Y:1.2699.
The abbreviations TREO, NdPr, MREO and MREO Ratio are defined in
the Glossary of this announcement.
Element distributions were calculated on a product-stream mass
basis using measured solution concentrations and recovered solution
volumes (recovered solution mass divided by measured solution
density), together with dry residue mass and residue assay. For
simplified reporting, the acid leach solution includes the primary
filtrate and its two associated washes. MREO extraction to the acid
leach solution was calculated as MREO mass in that solution divided
by MREO mass in the acid leach solution plus acid leach residue, with
each element converted to its oxide using the factors above.
The calculated head grades reconciled to 96–98% of the assayed
calcine grades for MREO. Based on calcine mass and assay, the
calcines accounted for 98–99% of the MREO in the composite
charges.
Location of
data points
Accu
Share your feedback
Discover